Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
100 bar |
| Velocity [vmax]: | 1.5 m/s |
Pressure
[pmax]:
|
100 bar |
| pH: | 1 - 13 |
| Density | 1.40 g/cm³ |
Temperature: t = -100… +280 °C
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Autoclave
- Filter
- Refiner
- Kneader
- Paddle dryer
Suitable for
- Pulp and paper industry
- Sugar industry
- Waste water technology
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 4 to 9 mm in square X-Section as Style P3.
04 - 09 mm on 1kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 4 | 44.6 |
| 5 [3/16"] | 28.6 |
| 6 | 19.8 |
| 6.35 [1/4"] | 17.7 |
| 7 | 14.6 |
| 8 [5/16"] | 11.2 |
| 9.5 [3/8"] | 7.9 |
| 10 | 7.1 |
| 11 [7/16"] | 5.9 |
| Size mm["] | Meter |
|---|---|
| 12 | 5.0 |
| 12.7 [1/2"] | 4.4 |
| 14 [9/16"] | 3.6 |
| 15 | 3.2 |
| 16 [5/8"] | 2.8 |
| 18 | 2.2 |
| 19 [3/4"] | 2.0 |
| 20 | 1.8 |
| 22 [7/8"] | 1.5 |
| 25 [1"] | 1.1 |
Trapez-Pack®3
Meta-Aramid Fiber with PTFE Blocking Agent and Silicone Run-In Lubricant
Characteristics
- Wear resistant, universal packing for applications with abrasive content
- High cross section density and structural stability, yet elastic and pliable
- Low friction, low shaft wear (HRC 45 shaft shaft surface hardness is sufficient)
- Clean packing, no contamination of media