Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 20 m/s |
Pressure [pmax]:
|
250 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
250 bar |
| pH: | 0 - 14 |
| Density | 1.65 g/cm³ |
Temperature: t = -100… +280 °C
Practical useful application data:
max. temperature: +200 °C
max. pressure centrifugal pumps: 20 bar
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Autoclave
- Filter
- Refiner
- Kneader
- Paddle dryer
Suitable for
- Pulp and paper industry
- Chemical industry
- Sugar industry
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 6 to 9 mm in square X-Section.
06 - 09 mm on 1kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 6 | 16.8 |
| 6.35 [1/4"] | 15.0 |
| 7 | 12.4 |
| 8 [5/16"] | 9.5 |
| 9.5 [3/8"] | 6.7 |
| 10 | 6.1 |
| 11 [7/16"] | 5.0 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.2 |
| 12.7 [1/2"] | 3.8 |
| 14 [9/16"] | 3.1 |
| 15 | 2.7 |
| 16 [5/8"] | 2.4 |
| 18 | 1.9 |
| 19 [3/4"] | 1.7 |
| 20 | 1.5 |
| 22 [7/8"] | 1.3 |
| 25 [1"] | 1.0 |
Trapez-Pack®16
Combination Braid of ePTFE with incorporated Graphite and PTFE Fiber Corner Reinforcement with Special Blocking compound, Silicone Run-In Lubricant
Characteristics
- High cross section density and structural stability, elastic and pliable
- Special Impregnation prevents hardening of packing
- Improved friction properties minimizing shaft or sleeve wear
- Shaft hardness HRC 25 is sufficient
- Resistant against solvents, acids and crystallizing media