Operating range
Pressure
[pmax]:
|
25 bar |
| Velocity [vmax]: | 25 m/s |
Pressure [pmax]:
|
250 bar |
| Velocity [vmax]: | 2 m/s |
Pressure
[pmax]:
|
100 bar |
| pH: | 0 - 14 |
| Density | 1.55 g/cm³ |
Temperature: t = -100… +280 °C
Main application
- Centrifugal pumps
- Mixer
- Agitators
- Autoclave
- Filter
- Refiner
- Kneader
- Paddle dryer
- Vacuum pumps
Suitable for
- Universal use
- Waste water technology
- Acids
- Alkaline solutions
- Oil and grease
Form of delivery
Registered users can view stock information
This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements.
Available from 4 to 9 mm in square X-Section as Style P1P.
04 - 09 mm on 1kg spool
10 - 15 mm on 2,5 kg spool
16 - 25 mm on 5 kg spool
Special length, pre-cut or die formed rings on request.
1 kg of packing of the following cross-sections corresponds to displayed meter lengths:
| Size mm["] | Meter |
|---|---|
| 4 | 40.3 |
| 5 [3/16"] | 25.8 |
| 6 | 17.9 |
| 6.35 [1/4"] | 16.0 |
| 7 | 13.2 |
| 8 [5/16"] | 10.1 |
| 9.5 [3/8"] | 7.1 |
| 10 | 6.5 |
| 11 [7/16"] | 5.3 |
| Size mm["] | Meter |
|---|---|
| 12 | 4.5 |
| 12.7 [1/2"] | 4.0 |
| 14 [9/16"] | 3.3 |
| 15 | 2.9 |
| 16 [5/8"] | 2.5 |
| 18 | 2.0 |
| 19 [3/4"] | 1.8 |
| 20 | 1.6 |
| 22 [7/8"] | 1.3 |
| 25 [1"] | 1.0 |
Trapez-Pack®1
Braid of ePTFE yarn with Incorporated Graphite and Silicone Run-In Lubricant
Characteristics
- Excellent heat conductivity
- Maximum protection of shaft against wear (HRC 25 is sufficient)
- Extended MTBF
- Easy and safe installation and handling
- No ageing process